Operation Manual

Appliance description - OST

1 – oven knob

2 – control knob oven temperature

3 – indicator light oven temperature

4 – indicator light oven

5 – control knob front left cooking zone

6 – control knob rear left cooking zone

7 – spark ignition gas hob

8 – control knob rear right cooking zone

9 – control knob front right cooking zone

10 – upper heating element for heating/

grilling

11 – ledges on four levels

12 – oven door

13 – fan

Appliance description - OKW

1 – oven knob

2 – control knob oven temperature

3 – indicator light oven temperature

4 – indicator light oven

5 – control knob front left cooking zone

6 – control knob rear left cooking zone

7 – spark ignition gas hob

8 – control knob rear right cooking zone

9 – control knob front right cooking zone

10 – electronic timer

11 – upper heating element for heating/

grilling

12 – ledges on four levels

13 – oven door

14 – fan

APPLIANCE DESCRIPTION

14 - 120 minutes cut-off timer

120 minutes cut-off timer

The function of the programming timer is to turn on the oven

for a pre-determined amount of time.

1) OPERATING

After having set the oven switch knob at the desired tempera-

ture, turn the timer knob in a clockwise direction to the desired

cooking time (maximum 120 minutes).

When the timer will return to position "0", a minute counter

ringing will advise that the oven will automatically turn off.

2) MANUAL POSITION

If the cooking time is longer than the 2 hours programme,

or if you wish to use the oven manually, to turn it off when you

desire, turn the knob to position .