Installation Instructions

EN
Code No: 700005835001
Fig1
Fig3
Fig2 Fig4
min 564
max 568
min 446
max 450
min 446
max 450
600
min
550
50
200 cm²
200 cm²
Built-under Dimensions
min 446
max 450
50
200 cm²
min 564
max 568
min
550
Fig1. Slide the oven partly into the recess. Lead the
connection cable to the power source.
Fig2. Slide the oven completely into the recess.
Fig3. Fasten the oven using the two screws (4 X 25 mm)
provoded.
Fig4. Make the electrical connection.
Check that the appliance works.
Installation
instructions
Building-in
dimensions
General
Technical Information
Electrical Supply: 230 V ~ 50 Hz
Dimensions
Set size: W 595 x H 454 x D 569.4
Built in size: W 555 x H 445 x D 548.8
This appliance complies with EU regulations.
Disposal of Packaging and Appliance
Packaging is recyclable.
Packaging may consist of the following materials:
- cardboard;
- polyethylene film (PE);
- CFC-free polystyrene(PS rigid foam).
Please dispose of these materials in a responsible
manner in accordance with government regulations.
The authorities can provide information on how to
dispose of domestic appliances in a responsible manner.
Safety
This appliance should only be connected by a
qualified technician. The Oven is NOT designed for
use in a commercial cooking setting. It should be
used exclusively for cooking food in a home setting.
The appliance is hot during and after use.
Exercise caution when young children are present.
Electrical Connection
The house mains to which the appliance is
connected should comply with national and local
regulations. Appliance should allow to disconnection
of the appliance from the supply after installation.
The disconnection may be achieved by having the
plug accessible or by incorporating a switch in the
fixed wiring in accordance with the wiring rules.
Install in the Cabinet
Kitchen Cabinets in contact with the oven must be heat-resistant up to 100 °C.
Pelgrim will take no responsibility for damage of cabinets from the heat.