Operation Manual

GB 14
Residual heat indicator
The zone can remain hot for some time after having been used. An ‘H’
remains on the display as long as the cooking zone is hot.
Pandetection
If the hob does not detect a (ferrous) pan after the cooking power has
been set, the display will blink and the hob will remain cold. If a (ferrous)
pan is not placed on the cooking zone within 1 minute, the cooking
zone will automatically switch off (see also page 11 and 12 ‘Pans’).
Child lock
You can secure the hob with the (child)lock. With this setting, the
hob cannot be switched on and the cooking zone settings cannot be
changed.
The child lock button gives you access to the following two functions:
1. The (standard) lock mode: prevents settings from being accidentally
changed, all of the set cooking processes remain active.
2. The child lock mode: prevents the hob from being accidentally
switched on, all of the cooking zones and the cooking timers/egg
timers must be switched off.
Switch the hob to (standard) lock mode
One or more cooking zones are active.
• Touch and hold the child lock button.
Attention! All of the set cooking processes remain active.
The red light above the child lock button is constantly illuminated.
All of the buttons are inactive, except the child lock button and the
On/Off button.
• Touch and hold the child lock button again to switch off lock mode
and unlock the control panel.
Switching on the child lock
The hob is in stand-by mode. The display for each cooking zone shows
‘0.’.
• Touch and hold the child lock button to switch on the child lock.
The red light above the child lock button is constantly illuminated.
F00002783A_screening IDK832 RVS
Eurokera Quartz Grey 331(for ceramic glass) / RAL 7035 (for tempered glass)
Erwin Slappendel
20110629
rev.A 20110706 E.Sl.
OPERATION