Operation Manual

GB 28
INSTALLATION
Building in
Cut opening in worktop
• Saw the opening in the worktop. This should be done very
accurately (see building in dimensions on p. 25).
• If the woodtop is made of treated wood, then coat the sawn
surfaces of the top with sealing varnish, to prevent moisture
causing the top to swell.
Placing the sealing tape
Remove the protective foil of the sealing tape (A) and attach the sealing
strip in the edge of the rvs plate. Do not attach the sealing strip through
the corner. Instead, cut 4 pieces that fit tightly together in the corners.
Install appliance and make connections
• Place the appliance in the worktop and secure it using the
mounting brackets and screws supplied.
montageklem A
montageklem B
• Connect the appliance to the mains.