Operation Manual

EN 8
Switching on the automatic heat-up function
1. The hob is switched on and a pan has been placed in a cooking
zone.
2. Use the + button in the desired cooking zone to select setting ‘A.’
(comes after ‘9.’).
‘A.’ and ‘9.’ flash alternately in the display.
Tip
A quick way of setting ‘A.’ is by touching the - button to set the cooking
zone to ‘9.’ and touching the + button once for setting ‘A.’.
1. Use the + or the - button to set the desired power.
If you select power setting 4, ‘4.’ and ‘A.’ will flash alternately in the
display. Attention! After 10 seconds, the - button works as an off
button).
2. When the pan has reached the desired temperature, the automatic
heat-up function automatically switches off and the cooking zone
continues at the set power.
The below table shows the duration of the automatic heat-up function
for each power setting:
Setting 1 2 3 4 5 6 7 8
Seconds 40 72 120 176 256 432 120 192
Switching off the automatic heat-up function
The hob is switched on. ‘A.’ and the power setting flash alternately in
the display.
1. Touch the - button for the cooking zone.
A different power setting is shown in the display and ‘A.’ stops
flashing.
Or:
2. Select setting ‘9.’.
Or:
3. Touch the - and the + button for the cooking zone at the same
time. The display shows setting ‘0.’, ‘A.’ stops flashing and the
cooking zone is switched off.
OPERATION