User's Manual

C656M-E (4/07) 5
Description
The TXB-V translator board allows Vicon
®
controllers to communicate with Pelco’s ExSite
™
, Esprit
®
, and
Spectra
®
systems. After setup, the controller functions the same as a Vicon controller normally would,
except as noted in the Operation section on page 21.
The TXB-V translator board has been tested and shown to work with the following Vicon systems:
• V1300X-DVC Remote Control Panel
• VPS324 Matrix Controller
• V1422
™
Matrix Controller
• V4480SCC Matrix 44
®
Card Cage
• V6680SCC Matrix 66
™
Card Cage
Based on the information published by the manufacturer, Pelco has reason to believe that the translator
board will also work with the following Vicon models:
• VPS1344
™
Matrix Switching System
• V1300 Series NOVA
™
Programmable Matrix Switching System
• V1400X-DVC System Console Control Station
Parts List
The following items are supplied:
1 TXB-V translator board (printed circuit board)
1 6-32 screw with lock washer (for Spectra III
™
/Spectra IV Series only)
1 4-40 screw with lock washer (unused)