Spec Sheet
PRODUCT SPECIFICATION
camera solutions
C1316 / REVISED 8-20-14
International Standards
Organization Registered Firm;
ISO 9001 Quality System
Sarix
®
TI Series Thermal IP Cameras
IP AND ANALOG THERMAL CAMERA WITH INTEGRATED FIXED ENCLOSURE
Product Features
• Uncooled, Sun-Safe, Amorphous Silicon Microbolometer
• Long Wave Infrared (LWIR)
• IP and Analog Capability
• 640 x 480, 384 x 288, or 240 x 184 Resolution Options
• 17 µm Pixel Size (640 x 480 model)
• 25 µm Pixel Size (384 x 288 and 240 x 184 models)
• Sensitivity Below NETD <50 mK at f/1.0
• 24 VAC/24 VDC
• H.264 and MJPEG Compression
• Ability to Control and Monitor Video Over IPv4 and IPv6 Networks
• Built-in Analytics
• Multiple Lens Options
• Designed for Maximum Environmental Protection
• Compact, Lightweight Aluminum Construction
• Meets NEMA Type 4X and IP66 Standards
• Complete with Sun Shroud and Heater/Defroster
• Adaptive Motion Detection
• ONVIF v1.02 Conformant
Camera
The Sarix
®
TI Series Fixed Thermal IP Camera is an advanced
thermal imaging system designed for easy integration into any new
or existing video security application. The system is designed to
provide detection, recognition, and identification of people and
vehicles in any lighting condition, including complete darkness. Every
Sarix TI Series features IP or analog outputs in the same package
and an integrated environmentally protected IP66 rated enclosure.
Additionally, when used in an IP system, the Sarix TI Series
features a full suite of designed-for-thermal analytics.
At the core of the Sarix TI Series is an uncooled sun-safe
microbolometer, long-wavelength infrared (LWIR) camera that
delivers up to 640 x 480 thermal video. These cameras feature an
amorphous silicon detector, which has lower fixed pattern noise and
a more uniform response than vanadium oxide detectors, while still
maintaining high resolution and sensitivity when exposed directly to
the sun during normal daylight hours.
The Sarix TI Series provides outstanding sensitivity below 50 mK
at f/1.0. It is capable of multiple display formats, including white hot,
black hot, and color signatures. The Sarix TI Series is available
with multiple lens configurations for effective deployment in a wide
range of applications.
The Sarix TI Series is available in 640 x 480, 384 x 288, or
240 x 184 resolution options. The fixed camera has an input voltage
of 24 VAC or 24 VDC.
In IP installations, the Sarix TI Series can support two simultaneous
video streams. The two streams can be compressed in MJPEG and
H.264 formats across several resolution configurations. The streams
can be configured to a variety of frame rates, bit rates, and group of
pictures (GOP) structures for additional bandwidth administration.
When used in analog installations, the Sarix TI Series supports
analog video output.
The powder-coated aluminum enclosure makes the Sarix TI Series
ideal for either indoor or outdoor applications. The system has a
sustained operating temperature range of –40° to 50°C
(–40° to 122°F). A built-in heater/defroster and sun shroud are
standard features on the Sarix TI Series.
Built-in Analytics
Pelco
™
Analytics enhance the flexibility and performance of the
Sarix TI Series when used in an IP video system. Pelco Analytics
are easy to configure for alarm notification when used with Endura
®
or a third-party system that supports alarms using Pelco’s API.
Web Interface
The Sarix TI Series uses a standard Web browser for powerful
remote setup and administration.






