INSTALLATION/OPERATION PMCL300 Series TFT LCD Monitor C2926M-D (9/09)
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Legal Notice . . . . . . . . . . . . . . . . . . . . . . . . . .
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Important Notices LEGAL NOTICE SOME PELCO EQUIPMENT CONTAINS, AND THE SOFTWARE ENABLES, AUDIO/VISUAL AND RECORDING CAPABILITIES, THE IMPROPER USE OF WHICH MAY SUBJECT YOU TO CIVIL AND CRIMINAL PENALTIES. APPLICABLE LAWS REGARDING THE USE OF SUCH CAPABILITIES VARY BETWEEN JURISDICTIONS AND MAY REQUIRE, AMONG OTHER THINGS, EXPRESS WRITTEN CONSENT FROM RECORDED SUBJECTS.
Description The PMCL300 Series TFT LCD monitors, designed specifically for the security industry, provide a high resolution display of computer signals and composite video. These 17- and 19-inch monitors use a color, thin film transistor (TFT) active matrix LCD panel that automatically adapts to the appropriate input resolution. The RGB and DVI mode settings allow the monitor to seamlessly accept a variety of native resolutions, making the PMCL300 Series compatible with lower resolution products.
PACKAGE CONTENTS Figure 1. Package Contents C2926M-D (9/09) ì 17-inch or 19-inch (Active/Wide) TFT LCD Monitor (1 ea.) î USA Standard Power Cord (1 ea.) ï European Standard Power Cord (1 ea.) ñ DVI Cable (1 ea.) ó RGB Cable with 15-pin, D-Sub Connector (1 ea.) r Remote Control Unit (1 ea.) s AAA Batteries for Remote Control (2 ea.) t Installation/Operation Manual (1 ea.
Installation The monitor can be installed using any of the following options: • Desktop Stand • Flat Wall Mounting • Rack Mounting DESKTOP STAND The monitor comes with a desktop foot stand attached, so it can be placed on any flat surface (desk or table). You can manually adjust the PMCL300 Series monitor to the viewing angle you want by repositioning the foot stand on the back of the monitor. To detach the stand, remove the four mounting screws from the back of the monitor.
RACK MOUNTING The monitor can be mounted in a rack using the PMCL-17ARM, PMCL-19ARM or PMCL-19WRM rack mount kit (depending on model). The weight of the mount is 1.1 lb (0.5 kg) and has a maximum load capacity of 22 lb (10 kg). To mount the monitor in a rack: 1. Attach the left and right brackets to the monitor using the eight M4 x 0.7 screws (supplied) with the rack mount kit. Figure 3. Installing the Brackets 2. Attach the monitor to the rack (refer to Figure 4): a.
REAR PANEL CONNECTORS S-VIDEO S-VIDEO VIDEO 1 VIDEO 1 INPUT OUTPUT INPUT OUTPUT AUDIO 1 INPUT OUTPUT DVI IN AC IN RGB IN PC AUDIO AUDIO 1 INPUT OUTPUT Figure 5. Rear Panel Connectors 10 ì AC IN: Connects power to the unit from a 100 VAC to 240, 50/60 Hz source. î DVI IN: Provides connection to digital signals from a computer or any Pelco device with DVI output. ï RGB IN: Provides connection to RGB output of a computer or any Pelco device with RGB output.
Operation FRONT PANEL CONTROLS MENU SOURCE VOL Figure 6. Front Panel Controls ì Menu: Displays the main on-screen menu. î Source: Selects the input source and confirms your choice. ï ▼and ▲: Navigates through the on-screen menu. ñ VOL (◄ and ►): Increases or decreases the volume. Also selects or adjusts items in the on-screen menu. ó (remote control signal receiver): Receives remote control signals. r (power label) s (power button and power indicator): Turns the monitor on and off.
REMOTE CONTROL FUNCTIONS MUTE POWER VIDEO1 VIDEO 2 RGB DVI MENU/EXIT S-VIDEO AUTO /VOL + /VOL ENTER ASPECT Figure 7. Remote Control ì POWER: Turns the monitor on and off. î AUTO: Selects auto adjustment of the screen in RGB mode. ï (◄/VOL– and /VOL+►,▲,▼): Increases and decreases the volume. The up and down arrows let you move the cursor up and down in the on-screen menu. ñ ASPECT: (PMCL319W only) Changes the screen’s scan mode (4:3, 16:9).
ON-SCREEN DISPLAY FUNCTION The PMCL300 Series on-screen display (OSD) lets you easily change the basic functions of the monitor from the front panel or the remote control. Figure 8 shows how to change the input source by accessing the menu using the OSD function. The input source name appears in the upper-right corner of the menu screen any time the input source is changed or when you press ENTER on the remote control. VIDEO 1 VIDEO 1/2 S-VIDEO RGB DVI Figure 8.
VIDEO AND S-VIDEO MODE MENU Input Menu MAIN MENU INPUT CONTRAST BRIGHTNESS COLOR SHARPNESS TINT 3D NOISE REDUCTION LANGUAGE OSD SETTING COLOR TEMPERATURE ISM DEFAULT SETTING INFORMATION VIDEO S-VIDEO RGB DVI Contrast Menu 0 100 Brightness Menu 0 100 Color Menu 0 100 0 Sharpness Menu 100 Tint Menu 0 100 OSD H Position 3D Noise Reduction Menu 0 OFF NORMAL STRONG OSD V Position Language Menu 0 ENGLISH ITALIAN FRENCH SPANISH GERMAN PORTUGUESE RUSSIAN CHINESE 100 OSD Dwelling Time OFF 5 30 O
The Video/S-Video mode menu contains the following features: Input: Changes the video input option. Select VIDEO or S-VIDEO. Contrast: Adjusts the black level of the image (0 to 100). Brightness: Adjusts the white level of the image (0 to 100). Color: Adjusts the color saturation of the video signal (0 to 100). Sharpness: Adjusts the picture softer or sharper (0 to 100). Tint: Adjusts the range of color: green to red (0 to 100).
RGB AND DVI MODE MENU Input Menu MAIN MENU INPUT CONTRAST BRIGHTNESS H. POSITION V. POSITION FREQUENCY PHASE AUTO POSITION OVERRIDE LANGUAGE OSD SETTING COLOR TEMPERATURE ISM DEFAULT SETTING INFORMATION VIDEO S-VIDEO RGB DVI Contrast Menu 0 100 Brightness Menu 0 100 0 H. Position Menu 100 0 V.
Not all menus are available for both RGB and DVI. Menus that are unavailable do not appear dimmed, while some menus that do not apply are not shown. The RGB and DVI mode menu contains the following features: Input: Changes the video input option. Select RGB or DVI. Contrast: Adjusts the black level of the image (0 to 100). Brightness: Adjusts the white level of the image (0 to 100). H-Position: (RGB only; dimmed in DVI mode.) Adjusts the horizontal position (0 to 100).
Troubleshooting If the following instructions fail to solve your problem, contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or +1-559-292-1981 (international) for assistance. Be sure to have the serial number available when calling. Do not try to repair the unit yourself. Opening it immediately voids the warranty. Leave maintenance and repairs to qualified technical personnel only. Refer to the Product Warranty and Return Information located on the inside back page of this document.
Specifications GENERAL Viewing Area PMCL317A PMCL319A PMCL319W 338 x 270 mm 376 x 301 mm 408 x 255 mm Pixel Pitch PMCL317A PMCL319A PMCL319W 0.264 x 0.264 mm 0.294 x 0.294 mm 0.284 x 0.284 mm Brightness 300 cdm2 Contrast Ratio 1000:1 Backlight Type 4 CCFL Viewing Angle (H/V) 160°/160° Response Time 5 ms Native Resolution PMCL317A, PMCL319A PMCL319W 1280 x 1024 SXGA 1440 x 900 WXGA Panel Aspect Ratio PMCL317A, PMCL319A PMCL319W 5:4 16:10 Panel Life 50,000 hours Display Colors 16.
PHYSICAL Dimensions PMCL317A PMCL319A PMCL319W 2.4" D x 14.9" W x 13.4" H (6.1 x 37.8 x 34.1 cm) 2.4" D x 16.4" W x 14.5" H (6.1 x 41.5 x 36.9 cm) 2.4" D x 17.6" W x 12.7" H (6.1 x 44.7 x 32.2 cm) Unit Weight PMCL317A PMCL319A PMCL319W 10.8 lb (4.9 kg) 12.6 lb (5.7 kg) 11.9 lb (5.4 kg) Shipping Weight PMCL317A PMCL319A PMCL319W 16 lb (7 kg) 18 lb (8 kg) 17 lb (8 kg) (Design and product specifications subject to change without notice.
Appendix RGB/DVI MODE SUPPORTED FREQUENCIES Table A describes the resolution supported under different frequencies. NOTE: Not all resolutions generated by your video source are available on the monitor. Table A. RGB and DVI Mode Supported Frequencies Resolution Vertical Frequency (Hz) 720 X 400 70 640 x 480 60/72/75 SVGA 800 x 600 56/60/72/75 XGA 1024 x 768 60/70/75 SXGA 1280 x 1024 60/75 WXGA 1280 x 720 60 WXGA* 1440 x 900 60 Mode VGA *PMCL319W only.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
www.pelco.com Pelco, Inc.
