Spec Sheet

Pelco, Inc. W
orldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: [phone] • FAX: [phone]
International Tel: [phone] • FAX: [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODELS
TF2000 Indoor, camera power supply, 120 VAC input.
One fused, 24 VAC output, 20 VA
TF9000 Same as TF2000 except 50 VA output
ELECTRICAL
Input Voltage 120 VAC, 60 Hz
Output Voltage 24 VAC
Output Power
TF2000 20 VA
TF9000 50 VA
Overload Protection Internal fuse (non-serviceable)
Input Connectors Two blades
Output Connectors Two screw terminals
Recommended
Wiring Distances See chart below
The following are the recommended maximum distances (transformer to load)
and are calculated with a 10-percent voltage drop. (Ten percent is generally
the maximum allowable voltage drop for AC-powered devices.) Distances are
calculated in feet; values in parentheses are meters.
Recommended Wiring Distance Chart
GENERAL
Construction Plastic
Finish Beige
Environment Indoor
Unit Weight
TF2000 0.80 lb (0.36 kg)
TF9000 1.70 lb (0.76 kg)
Shipping Weight
TF2000 1 lb (0.45 kg)
TF9000 2 lb (0.91 kg)
Input
Voltage
Total VA
Consumed
Wire Gauge
20 AWG
(0.5 mm
2
)
18 A
WG
(1.0 mm
2
)
16 A
WG
(1.5 mm
2
)
24 V
AC 10
20
50
283
141
56
(86)
(42)
(17)
451
225
90
(137)
(68)
(27)
716
358
143
(218)
(109)
(43)
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2006, Pelco, Inc. All rights reserved.