Installation Manual

22 C4687M-C (7/13)
Startup and Shutdown
STARTING UP THE UNIT
1. Unlock and open the bezel.
2. Press the power button. The power indicator glows.
Figure 19. Starting Up the Unit
3. Close and lock the bezel.
4. Check indicators:
• The power indicator should glow blue. (If the bezel is open, the power indicator glows white.)
• The unit status indicator should glow solid green after the unit starts up.
• The network status indicator on the front panel shows the network connection speed and status.
SHUTTING DOWN THE UNIT
You can shut down the unit locally using the power button or remotely using Endura Utilities.
PERFORMING A REMOTE SHUTDOWN
1. Open Endura Utilities.
2. Select SM5200 in the left pane of the System Attributes tab.
3. Right-click the unit in the right pane, point to Scripts, and then select One-Time Script.
4. Type shutdown -h now in the Script Command field.
5. Click OK; a confirmation prompt appears.
6. Click Yes.
PERFORMING A LOCAL SHUTDOWN
1. Unlock and open the bezel.
2. Press and hold the power button until the unit shuts down.
3. Close and lock the bezel.
ì
Power Button/Power Indicator