Installation Manual

10 C4687M-C (7/13)
PRODUCT LABELS
PRODUCT SERIAL NUMBER LABEL PLACEMENT
Product serial number labels help identify your system and its factory configuration if your unit or its components should require service.
Three labels citing your product’s serial number are attached to the unit. One label is attached to the upper-right corner of the rear of the unit.
A second, smaller label is attached to the inside left of the bezel.
Because rack mounting and other installation options may obscure the factory-applied labels, a third set of labels is provided for you to attach to
your product documentation or to another product location that will not be obscured by installation.
To use these labels:
1. Locate the label attached to the outside of the front bezel with a yellow sticker that reads, “Extra serial number label: remove prior to
installation.”
2. Remove the yellow sticker.
3. Peel off the back of the label and attach it to this manual, other product documentation, or an unobstructed product location.
USER SUPPLIED PARTS LIST
The following installation tools and parts are needed for installation, but not supplied.
• Power source (110/220 VAC)
• Small Phillips screwdriver, if mounting the unit into a rack