Instructions

66
2.2.6.3 SD Record Handler
Save video clip backups from a variety of activated events to an SD card. Before using this function, a SD card must be installed
in the camera beforehand.
NOTE: The SD card must be formatted as FAT32. Other formats are not compatible with the camera.
FIGURE 2-54: SD RECORD HANDLER SETTINGS
1. Check to enable SD Record Handler for Alarm, Motions 1 through 4, Sabotage Detection, Schedule, Audio
Detection, Object Detection, Adaptive Motion, Directional Motion, and Object Removal.
2. Select the Attach JPEG Snapshot box if you want to send a JPEG as an attachment.
3. Choose either Video only or Audio and Video for Record Type, and choose One Shot or Continuous for Record
Status. Then, set a Clip Duration (5~10 seconds) and Clip Size (10~20 MB).
NOTE: It is required to define duration and size parameters for “One Shot” method, whilst only size value needs to
be defined for “Continuous” method.
4. Set overwrite ON or Off to enable or disable the SD card to be overwritten automatically when the SD card is full of
recordings.
5. Usage: Information of SD card usage.
6. SD Format: Click to erase information off from the SD card.
7. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without