Instructions

64
FIGURE 2-51: SNAPSHOT NAMING
You can also set Trigger Interval time and determine the recording condition: OFF, All Day, Schedule 1, or Schedule 2 from
scheduled table during 24/7 for Schedule. The trigger interval can be adjusted on a scale bar with its corresponding seconds
shown in the box underneath.
FIGURE 2-52: FTP UPLOAD HANDLER SCHEDULED SETTINGS
2.2.6.2 Relay Open/Close Handler
Define the relay related settings for alarm output device when a selected event is triggered under this page. The connected
relay external device can be activated by the method of Normally Open or Normally Closed.