Instructions

59
FIGURE 2-45: AUDIO DETECTION
2.2.5.5 Object Counting
The Object Counting behavior counts the number of objects that enter a user-defined zone. This behavior can be used to count
people at a store entrance/exit or inside a store where the traffic is light. It might also be used to monitor vehicle traffic on
highways, local streets and roads, parking lots, and garages.
FIGURE 2-46: OBJECT COUNTING SETTING
Object Counting
1. Select “ ”, then click and hold on the left-side preview image to draw a line on the wanted area (up to three lines
can be drawn).
2. Select “ ”, then click on the left-side preview image to draw a desired shape (three to eight sides) covering the
desired area.
3. Click “ ” to delete a specific Zone
4. Select a specific Zone from the Zone list to perform the following actions..;
1. Type a desired name for each Zone.
2. The options from Direction dropdown menu (A to B, B to A) helps user to define the exact direction to be
counted.
3. Check Enable button to enable Object Counting for any or all of the Zones.
4. Pressing the Reset Counting button will erase the accumulated counting records.
5. Sensitivity: Choose different levels of sensitivity from High, Medium High, Medium, Medium Low and Low.