Instructions

54
2.2.4.3 Local Recording
Local Recording enables users to record and save video files locally on the SD card inserted, instead of recording and saving
them over the network that will occupy a huge portion of memory and bandwidth. Check to enable this type of recording. Note
that once the card is full, the oldest and previously-recorded video files on the card will be overwritten when the option “Enable
Continuous Recording” is checked.
FIGURE 2-38: LOCAL RECORDING
2.2.4.4 RTP Settings
Multicast
Here a user can configure multicast RTP streams. RTP is a common way of transmitting and synchronizing surveillance system
video and audio streams over RTSP session. Multicast provides the most efficient usage of bandwidth when there are large
numbers of clients viewing simultaneously.
FIGURE 2-39: RTP SETTINGS
Primary Video Stream
 Address: Set the multicast address for RTP video streaming.
 Port: Set the multicast port number for RTP video streaming to an even number in the range 1024 to 65534. To disable
the port set value to 0.