Instructions

2.2.2 Network & Security

Use the Network tab to change the camera’s general network settings, select the Transport Layer Security(TLS) settings,

enable Secure Shell (SSH), configure 802.1x port security settings, choose SNMP Server, Firewall mode, enable FTP access

to this camera, activate RTP stream settings and VMS Connectivity with the specific server.

NOTE: Other underlying protocols such as NTCIP 1205, ARP, RTCP, and WS-Discovery are supported by all models.

NOTE: Enabling SNMP protocol (refer to 2.2.2.6 SNMP) will automatically enable NTCIP 1205.

2.2.2.1 Network

Set the General Network Settings for network communication settings.

FIGURE 2-10: GENERAL NETWORK SETTINGS

System Settings

Settings under the System Settings are Hostname, HTTP Port, HTTPS Port, and RTSP Port. Contact your network

administrator before changing port settings to ensure that your port settings do not conflict with your network infrastructure.

 Hostname

1. Click in the Hostname box and highlight the text.

2. Type a user-friendly name into the Hostname box (1 to 21 characters) using any combination of alphanumeric

characters. A user-friendly name makes it easier to recognize the device on the network.

3. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without

saving it.