Spec Sheet

TECHNICAL SPECIFICATIONS
OPERATING TEMPERATURE
In-Ceiling (Indoor):
Operating Temperature –10°C to 55°C (14°F to 131°F)
Cold Start –10° C
Environmental Units:
Sustained Operating
Temperature –51°C to 60°C (–59.8°F to 140°F)
Absolute Max Operating
Temperature 65°C (4 hours per day)
Cold Start –40°C (–40°F)
Ice Free –20°C (–4°F)
De-Ice –20°C (–4°F)
Storage Temperature –20°C to 65°C (–4°F to 149°F)
Storage Humidity 5 to 95% (non-condensing)
OPERATING HUMIDITY
In-Ceiling (Indoor) 10 to 90% RH (noncondensing)
Environmental In-Ceiling,
Environmental Pendant 10 to 100% RH
MECHANICAL
(Dome Drive Only)
Variable Speed 0.05° to 100°/sec (manual pan speed)
Preset Accuracy ±0.05°
Pan Movement 360° continuous pan rotation
Vertical Tilt +1° to –90°
Maximum Pan Speed Up to 700° per second
Maximum Tilt Speed Up to 500° per second
Manual Pan/Tilt Speeds
Pan 0.05° to 100°/sec manual operation
Tilt 0.05° to 50°/sec manual operation
Preset Speeds
Pan 700°/sec
Tilt 500°/sec
WIND SPECIFICATIONS
Full Motion Control 0 to 130 knots (150 mph/241 kmh)
PELCO’S SMART COMPRESSION TECHNOLOGY
Pelco’s Smart Compression Technology lowers bandwidth and storage
requirements by up to 70%, while reducing storage requirements.
Pelco’s Smart Compression Technology dynamically analyzes motion
occurring within live video in real-time, to intell
igently compress the
information you don’t need, while retaining details with clear quality in the
areas that are important in the scene. By enabling Dynamic GOP, an added
feature of Smart Compression, the number of I-frames are automatically
reduced in scenes with low motion. Based on the complexity of scenes and
motion occurring, such as a store room that has limited entry and exit, up to
70% bandwidth savings can be achieved.
PELCO CAMERA LINK
Pelco Camera Link technology brings together the best of two
flagship Pelco products: You get the seamless and continual
situational awareness of Optera across a wide space along with the
ability to automatically zoom in for great detail with nearby Spectra
Enhanced and follow people and vehicles closely.
POWER REDUNDANCY
Spectra Enhanced 7 range cameras are designed with Power over
Ethernet (PoE), 24 VAC and 48 VDC to reduce costs
and simplify
planning, wiring, and installation. PoE functionality works with PoE-
enabled network switches or power injectors, eliminating the need
for separate power supplies and cabling, and increasing camera fail
safety through an interruptible power supply (UPS).
The cameras also support power supply failover between PoE and 48
VDC/24VAC and allow a primary power source selection for the
power draw
. If the camera is running with both PoE and 48 VDC/24
VAC power sources, and then the primary power source is lost, the
camera will switch to an alternative source without any interruption
or video loss. Once primary power is restored, the camera seamlessly
switches back to the primary source.