Spec Sheet

TECHNICAL SPECIFICATIONS
VIDEO
Video Encoding H.264 High, Main, or Base profiles,
H.265 Main profile,
and MJPEG
Video Streams Up to 3 simultaneous streams; the second
stream is variable based on the setup of the
primary stream
Frame Rate Up to 60, 50, 30, 25, 20, 15, 12.5, 10, 8.333,
7.5, 6, 5, 3, 2.5, 2, 1 (depending on the coding,
resolution, and stream configuration)
Highest Resolution
4K models 3840 x 216
0
2MP models 1920 x 1080
NETWORK
Supported Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP),
UPnP, DNS, DHCP, autoconf, static, RTP, RTSP,
RTCP, NTP, IPv4, IPv6*, SNMP v2c/v3, QoS,
HTTP, HTTPS, SNMP v2, v3, SSL, SSH, TLS,
TTLS, WS-discovery, SMTP, FTP, 802.1x (EAP),
ARP, ICMP, and NTCIP 1205
Users
Unicast Up to 20 simultaneous users depending on
resolution settings (2 guaranteed streams)
Multicast Unlimit
ed users
Security Access Password protected
Software Interface Web browser view and setup
Pelco System Integration Endura 2.0 (or later)
Digital Sentry 7.3 (or later)
Open API Pelco API or ONVIF Profile S, G, and T
Mobile Application Integrated to Pelco Mobile App
MINIMUM SYSTEM REQUIREMENTS
Processor Intel
®
Core
™
i3 Processor, 2.4 GHz
Operating System Windows
®
10 Windows 7 (32-bit and 64-bit)
or Mac
®
OS X 10.4 (or later)
Memory 4 GB RAM
Network Interface Card 100 megabits (or greater)
Web Browser Internet Explorer
®
8.0 (or later) or Firefox 71
(or later); Chrome 81 (or later); Internet
Explorer 8.0 (or later) is recommended for
configuring analytics
ANALYTICS
Required Systems for Pelco Analytics
Pelco Interface VideoXpert;
VX Toolbox;
Endura 2.0 (or later);
Digital Sentry 7.3 (or later)
Open API The Pelco API
can transmit behavior alarm
data to third-party applications, available at
pdn.pelco.com
GENERAL
Construction
Back Box Aluminum
Dome Drive Aluminum, thermoplastic
Lower Dome Nylon for 2 MP models, polycarbonate for 4K
models
Light Attenuation
Smoked f/0.5 light loss
Clear f/0.0 light loss
Cable Entry (back box)
In-Ceiling 0.75-inch conduit fitting
Pendant Through 1.5-inch NPT pendant mount
Unit Weight (1080p models) (4K models)
In-Ceiling, Indoor 3.0 kg (6.6 lb) 3.2 kg (7.05 lb)
In-Ceiling, Environmental 3.4 kg (7.5 lb) 3.6 kg (7.94 lb)
Pendant, Environmental 3.9 kg (8.6 lb) 4.1 kg (9.04 lb
Effective Projected Area (EPA)
Pendant Without mount and with sun shield, 47 square
i
nches
With IWM Series mount with sun shield, 96.5
square inches
ALARM
Unsupervised Detects open or closed alarm state
Supervised Detects open and short alarm state with
external 1-kohm resistor
Inputs (4) 3.5 VDC maximum, 3.5 mA maximum
Relay Outputs (2) ±32 VDC maximum, 150 mA maximum
AUDIO
Audio Bidirectional, full duplex
Input Line level; 3-kohm differential impedance,
1Vp-p maximum signal level
Output Line level; 600-ohm differential impe
dance,
1Vp-p
Streaming Embedded audio
STORAGE
Local Storage SD card slot with support for SDXC cards
Capture 1–5–10 second video clips on camera
sabotage, motion detection, or alarm input;
record video continuously in the case of
network outage with option to overwrite;
access video through FTP protocol and ONVIF
Profile G
*
Supports mixed IPv4 and IPv6 installations, but not IPv6-only deployments.
†
Pelco Media Player is recommended for control, smoothness, and reduced
latency as compared to QuickTime.