Operation Manual

Spectra Enhanced 7 Operations Manual, PTZDome Cameras
C6653M-B | 06/20
46
The ideal scene selection for the Directional Motion behavior contains light traffic with all people and
objects moving in the same direction, minimal obstructions, and a clean background; however, the
behavior can be used in settings that do not meet all of these requirements. If heavy traffic or a busy
background is unavoidable, place zones in a relatively stable area.
Avoid crowded scenes in which people move in all directions or stand in one place for long periods of time.
Using Loitering Detection
The Loitering Detection behavior identifies when people or vehicles remain in a defined zone longer than the
user-defined time allows. This behavior is effective in real-time notification of suspicious behavior around
ATMs, stairwells, and school grounds.
Install the camera in a ceiling or against a wall with the lens pointing at a slight downward angle, above
regular motion activity.
The ideal scene for Loitering Detection behavior is one with light traffic and a clean background. If heavy
traffic or a busy background is unavoidable, place the user-defined zone in a relatively stable area.
Avoid crowded scenes where people move in all directions or stand in one place for long periods of time.
Using Object Counting
The Object Counting behavior counts the number of objects that enter a user-defined zone. This behavior
can be used to count people at a store entrance/exit or inside a store where the traffic is light. It might also
be used to monitor vehicle traffic on highways, local streets and roads, parking lots, and garages.
The ideal scene for the Object Counting behavior contains light traffic, minimal obstructions, and a clean
background. If heavy traffic or a busy background is unavoidable, place zones (polygon or line) in relatively
stable areas.
A one-directional motion scene (for example, a vertical hallway) is preferable. Avoid crowded scenes in
which people or objects move in all directions or remain in place for long periods of time.
Using Object Removal
The Object Removal analytic behavior triggers an alarm if an object is removed from a user-defined zone. It
is ideal for detecting the removal of high-value objects, such as a painting from a wall or a statue from a
pedestal.
Install the camera in a high position looking down on the scene. The monitored object should occupy a
quarter of the camera scene, and the field of view should be as wide as possible.
The ideal scene selection for the Object Removal behavior is a clean background with stable lighting and
minimal obstruction.
Using Stopped Vehicle
The Stopped Vehicle behavior detects vehicles stopped near a sensitive area, and sets an alarm if the
vehicle is present for longer than a user-specified period of time. This behavior is ideal for parking
enforcement, identifying suspicious parking, finding traffic lane breakdowns, and spotting vehicles waiting
at gates.
Install the camera in a ceiling or against a wall with the lens pointing at a slight downward angle, above
regular motion activities.
The ideal scene for the Stopped Vehicle analytic behavior contains light traffic in which vehicles are
continually moving, there are minimal scene obstructions, and the background is clean. If heavy traffic or a
busy background is unavoidable, place monitoring zones relatively stable areas.
Avoid crowded scenes where people or objects remain in place for long periods of time.