Operation Manual
Table Of Contents
- Important Notices
- Accessing the Camera
- Accessing the Live Video Page
- System Menu
- Using the Network & Security Menu
- Using the Imaging Menu
- Configuring Exposure Settings
- Configuring Focus Settings
- Setting White Balance
- Using Window Blanking
- Configuring Options in the PTZ Menu
- Using A/V Streams Menu
- Events
- Configuring Sources
- Configuring Handlers
- Configuring an Event Handler: Send Email
- Configuring an Event Handler: Upload JPEG to FTP Server
- Configuring an Event Handler: Write JPEG to SD Card
- Configuring an Event Handler: Run Pattern
- Configuring an Event Handler: Go to Preset
- Configuring an Event Handler: Run Tour
- Configuring an Event Handler: Run Scan
- Configuring an Event Handler: Open/Close Relay
- Configuring an Event Handler: Display Overlay
- Configuring an Event Handler: Play Audio
- Configuring an Event Handler: Write Recording to SD Card
- Configuring an Event Handler: Upload Recording to FTP Server
- Deleting an Event Handler
- Analytic Configuration
- Event Stream
- Contacting Pelco for Troubleshooting
Spectra Enhanced 7 Operations Manual, PTZDome Cameras
C6653M-B | 06/20
33
a. Enable the Controls.
Note: You can disable the Controls at any time.
b. Use the slider bar to select the Average Bitrate Limit, type in a value, or click Copy to
Slider.
c. Use the slider bar to select the Observation Period in Days, or type in a value.
6. Click Save.
7. To view the Long-Term Graph for either stream:
a. Select the Primary VideoStream or Secondary Video Stream at the top of the page.
b. Select the Bitrate Units: either total kbps or Gbytes/day.
c. To the right of the Long-Term Graph title, click Update.
The graph helps you understand how much storage the camera will use.
d. If appropriate, click Delete Long-Term Data for [Secondary or Primary, whichever is
selected].