Operation Manual
Table Of Contents
- Important Notices
- Accessing the Camera
- Accessing the Live Video Page
- System Menu
- Using the Network & Security Menu
- Using the Imaging Menu
- Configuring Exposure Settings
- Configuring Focus Settings
- Setting White Balance
- Using Window Blanking
- Configuring Options in the PTZ Menu
- Using A/V Streams Menu
- Events
- Configuring Sources
- Configuring Handlers
- Configuring an Event Handler: Send Email
- Configuring an Event Handler: Upload JPEG to FTP Server
- Configuring an Event Handler: Write JPEG to SD Card
- Configuring an Event Handler: Run Pattern
- Configuring an Event Handler: Go to Preset
- Configuring an Event Handler: Run Tour
- Configuring an Event Handler: Run Scan
- Configuring an Event Handler: Open/Close Relay
- Configuring an Event Handler: Display Overlay
- Configuring an Event Handler: Play Audio
- Configuring an Event Handler: Write Recording to SD Card
- Configuring an Event Handler: Upload Recording to FTP Server
- Deleting an Event Handler
- Analytic Configuration
- Event Stream
- Contacting Pelco for Troubleshooting
Spectra Enhanced 7 Operations Manual, PTZDome Cameras
C6653M-B | 06/20
20
7. Select the network protocol (NTCIP, Kapsch).
8. Click Save.
Configuring Firewall Settings
1. Select Firewall Configuration from the Network & Security menu.
2. Select Off, Allow, or Deny from the Mode drop-down menu.
l Off: The default setting is Off. Disables Firewall Configuration.
l Allow: Allows all IP addresses entered to view the camera.
l Deny: Denies all IP address entered to view the camera.
3. Type up to 10 IP addresses in CIDR format in the boxes provided.
Note: Incorrect configuration of these IP addresses can result in being locked out of the
camera. All IP addresses entered will either be allowed or denied. You cannot allow some
IP addresses and deny others.
4. Click Save .
Using the Imaging Menu
The Imaging menu provides Image Enhancement, Digital Processing, Exposure, WDR, Day/Night
transition, Focus, White Balance, and Window Blanking capabilities.
Restoring Imaging Settings
The Imaging menu contains buttons that allow you to restore your camera’s imaging settings.
l Use Restore Settings to Defaults to reset your camera’s settings to their factory defaults on the
current webpage.
l Use Restore All Imaging Settings to reset all of your camera’s imaging settings to their factory
defaults.
Configuring Image Enhancement
General Settings control Image Enhancement and Digital Processing features.
Image Enhancement
Backlight Compensation
Use Backlight Compensation to enhance objects in the center of the picture when a bright backlight
causes subjects in the picture to appear dark or silhouetted. Use Off for normal lighting situations.
Noise Reduction
Noise Reduction adjusts for video noise in the scene.
l Off: The camera does not compensate for video noise.
l Normal: Adjusts for noise in low-light scenes.
l High: Adjusts for a greater amount of noise in low-light scenes.