Spec Sheet

PRODUCT SPECIFICATION
viewing solutions
C2219 / REVISED 6-10-15
International Standards
Organization Registered Firm;
ISO 9001 Quality System
PMCL Series Mounts
WALL/CEILING/RACK MOUNTS, MONITORS
Product Features
• Articulating Arm Wall Mount
• Fixed and Tilt Wall Mount for 300/400/500 Series Monitors
• VESA-Compliant Wall and Ceiling Mounts
• Rack Mounts for 300 and 400 Series LCD Monitors
• Can Be Used with Pelco Series LCD Monitors
• Unique Tilt/Swivel Head Design Ensures Optimum Viewing Angle
• Easy to Install
• Aluminum or Steel Construction
• For Indoor Applications Only
Pelco’s family of monitor mounts has been designed for use with
VESA
®
-compliant monitors. Mounts for the PMCL 300/400/500
Series monitors include several wall and ceiling mounts. Three rack
mounts are available for 300/400/500 Series monitors. Many of the
mounts feature a unique tilt/swivel capability, which allows an LCD
monitor to be swiveled 360 degrees for portrait or landscape viewing
and tilted 35 degrees up or down. This tilt/swivel quality ensures the
proper viewing angle in any application. Made from heavy-duty
aluminum, these mounts are designed to support up to 90 pounds in
any indoor installation.
The PMCL-WM and PMCL-WMT are two-piece wall mounts. One
piece attaches to the rear of any monitor, and the other piece fastens
to a wall. The monitor then slides into the V-shaped piece on the
wall, making installation quick and easy. A setscrew secures the two
sections together. The PMCLNBWMF flat wall mount,
PMCLNBWMT tilt/swivel mount, and PMCLNBWMS articulating
arm wall mounts are designed for use with the LCD monitors. All of
these mounts support a minimum mounting pattern of 200 x 200 mm
and a weight capacity of 79.38 kg (175 lb).
The PMCL-WM1A is an articulating arm wall mount that is
equipped with convenient tilt/swivel articulating arms for greater
viewing flexibility. The PMCL-WM1A is designed for use with the
300/400 Series LCD, PMCL524BL, and PMCL532BL monitors. The
PMCLNBWMS is a scissor-style articulating arm wall mount
offering 10 degrees of tilt. The PMCLNBWMS is designed for use
with the PMCL532BL, PMCL542BL, PMCL546BL, and
PMCL555BL monitors.
The tilt/swivel PMCL-CMP allows an LCD monitor to be mounted
from the ceiling. It is equipped with an adjustable 15- to 30-inch
(38 t o 76 cm) telescoping pole. The PMCL-CM is a similar ceiling
mount that does not include a pole. This mount allows a customer to
purchase any length of 1.5-inch NPT threaded pipe for use in
applications with higher ceilings. Both of these ceiling mounts can
also be used with Pelco’s MRCA ceiling mount.
The PMCL-V200 is an adapter plate that attaches to the
PMCL-WM, PMCL-WMT, PMCL-WM1A, PMCL-CM, and
PMCL-CMP. This adapter plate allows the mounts to be used with
the PMCL532BL larger format monitor. It also accommodates
monitors with 200 x 200 mm hole patterns.
There are two rack mount kits for installing monitors in standard
19-inch (48 cm) equipment racks: the PMCL-17ARM and
PMCL-19ARM, which accommodate the 17-inch (43 cm) and
19-inch (48 cm) monitors, respectively. These mounts allow the
monitor to tilt up or down for optimum viewing.
PMCL-WM1A ARTICULATING ARM WALL MOUNT
AND PMCL SERIES MONITOR