Spec Sheet

Pelco, Inc. Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: [phone] • FAX: [phone]
International Tel: [phone] • FAX: [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODEL
PM14 Light duty wall mount for PT270P, PT270-24P,
and PT280-24P pan/tilts or light-weight
enclosures
RELATED PRODUCTS
PA101 Pole mount adapter for PM14 mount.
Stainless steel straps supplied. Straps fit
3-inch (7.62 cm) to 8-inch (20.32 cm) diameter
pole.
MECHANICAL
Pan/Tilt Mounting
PT270/PT280 Three 1/4-20 x 1.25 cap screws (supplied)
Mounting Method Secure to solid surface with three 1/4-inch
diameter fasteners or use two fasteners (one
1/4-inch diameter and one 5/16-inch
diameter) for center mounting holes in
applications where wall studs are
encountered. (Fasteners not supplied)
GENERAL
Construction Die-cast aluminum
Finish Gray polyester powder coat
Suggested
Maximum Load 20 lb (9.07 kg)
Unit Weight
PM14 1 lb (0.45 kg)
PA101 0.88 lb (0.40 kg)
Shipping Weight
PM14 2 lb (0.90 kg)
PA101 2 lb (0.90 kg)
CERTIFICATIONS
• UL Listed
Pelco and the Pelco logo are registered trademarks of Pelco, Inc.
Product specifications and availability subject to change without notice.
©Copyright 2006, Pelco, Inc. All rights reserved.
0.875
(2.22)
2X
Ø0.25 X 0.75 SLOT
(0.64 X 1.91), 4X
5.00
(12.70)
2.86
(7.26)
1.00
(2.54)
0.75
(1.91)
2X
1/4-20 X 3/4 STUD, 3X
4.00
(10.16)
2.725
(6.92)
REF.
0.425
(1.08)
1.30
(3.30)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
PA101 POLE ADAPTER MOUNT