Spec Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel (800) 289-9100 Fax (800) 289-9150
International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120
www.pelco.com www.pelco.com/community
TECHNICAL SPECIFICATIONS
FRONT PANEL INDICATORS
Power Blue Pelco badge
Software Status Green, amber, red (based on diagnostics)
Ethernet Port 1 Green, red, off
Ethernet Port 2 Green, red, off
Unit Status Green, amber, red
Hard Drive Status Green, red
POWER
Power Input 100 to 240 VAC, 50/60 Hz, autoranging
Power Supply Internal, dual-redundant, hot swappable
Power Consumption Operating Average
100 VAC 262 W, 2.65 A, 895 BTU/H
115 VAC 263 W, 2.31 A, 895 BTU/H
220 VAC 254 W, 1.25 A, 868 BTU/H
ENVIRONMENTAL
Operating Temperature 10° to 35°C (50° to 95°F) at unit air intake
Storage Temperature –40°to 65°C (–40° to 149°F)
Operating Humidity 20% to 80%, noncondensing
Max Humidity Gradient 10% per hour
Operating Altitude –16 to 3,048 m (–50 to 10,000 ft)
Operating Vibration 0.25 G at 3 Hz to 200 Hz at a sweep rate of
0.5 octave/minute
Note: The temperature at the unit air intake, measured at the front
of the bezel, can be significantly higher than room temperature.
Temperature is affected by rack configuration, floor layout, air
conditioning strategy, and other issues. To prevent hard disk drive
failure and unit damage, make sure the temperature at the air intake
of the unit is continuously within the operating temperature range.
PHYSICAL
Construction Steel cabinet
Finish
Front Panel Gray metallic with black end caps
Chassis Black matte finish
Dimensions (without rails) 61.8 x 43.2 x 13.2 cm
(24.3" D x 17.0" W x 5.2" H)
Unit Weight
Empty (without drives) 21 kg (46.4 lb)
Loaded (with drives) 30 kg (66.8 lb)
Shipping Weight 35 kg (77.0 lb)
Mounting Options Rack, 3 RU per unit
(rack rails and hardware are supplied)
CERTIFICATIONS/RATINGS
CE, Class A; meets EN50130-4 standard requirements
FCC, Class A
UL/cUL Listed
•C-Tick
S-Mark for Argentina
•CCC
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the
ONVIF logo are trademarks of ONVIF Inc. All other product names and
services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2015, Pelco, Inc. All rights reserved.