Installation Manual

English
|
39
Web Viewer
Configuration and operation for presets and patterns
Patterns and presets can be configured directly from the OSD for third-party cameras that support these features.
1.
Access the OSD from the Settings page.
2.
Using the arrow keys select Dome Settings, and then
press the Enter key.
3.
Using the arrow keys select Presets or Patterns, and then
press the Enter key.
4.
Proceed to program presets and patterns. Refer to the
Installation/Operation manual for the appropriate Product
from Camera Solutions.
PTZ Settings
Set up each camera’s PTZ settings.
~
Protocol : Select a supported PTZ protocol.
~
Address : Enter the D or P protocol address of the
connected PTZ.
~
Baud Rate : Select the transfer speed of the connected
PTZ.
Video Loss Alarm
Set whether to activate the alarm if video is no longer present. The camera is not functioning properly.
Delay before alarm
Set the period of video loss, in seconds, that will trigger
a video loss alarm.