Installation Manual

Web Viewer

CAMERA CONFIGURATION

Choose number 1 to the number of channels on the encoder.

General

Setup the camera connected to the encoder.

Digital Processing

Adjust each camera channel video input.

Saturation Adjust : Adjust video saturation.

Contrast Adjust : Adjust video contrast.

Brightness Adjust : Adjust video brightness.

Hue Adjust : Adjust video tint.



Click <Restore Settings to Defaults> to restore

the factory settings.

Live Preview

Check videos of the selected video channel.

OSD

Use the arrow keys on your keyboard to navigate through the

menus then press the Enter key to make your selection.