Installation Manual

English

Web Viewer

NETWORK SETTING

General

Modify the network default settings of the encoder.

System Settings

Set the system hostname and port.

Hardware Address : Presents the MAC Address of the

encoder device.

Hostname : A user-friendly name into the Hostname

box (1 to 21 characters) using alphanumeric characters

should be specified.

A user-friendly name makes it easier to recognize the

device on the network. Numeric-only names are not

allowed.

HTTP Port : The HTTP port used to access the

encoder from a web browser. Default value is 80 (TCP).

HTTPS Port : Security enhanced version of the web

communication protocol, HTTP.

Used to set HTTPS mode in SSL; the default value is

443 (TCP).

RTSP Port : Port number used to support remote connection to the encoder from the client software.

IPv4 Settings

Set the IPv4 of the encoder.

IP Address : Displays the currently set IP address.

Subnet Mask : Displays the IP address set for the <Subnet Mask>.

Gateway : Displays the IP address set for the <Gateway>.

Primary DNS/Secondary DNS : Sets a valid IP address for the DNS server.

Settable when DHCP is not selected.