Installation Manual

English
|
31
Web Viewer
No. Name Description
h
Pattern Activates the pattern selected.
i
Stream Selection
Selects the viewable video stream that displays in live view (Primary, Secondary, QuickView) and selects unicast
or multicast and throttle settings.

It will not be presented to users who are designated as Viewers.
j
View the Selected Tab Composed of Live, Settings, Help, and Logout settings menus.
k
Maximize Viewing
Area
Scales the image to the full size of the browser. To resize the video pane to normal view, click the Show Toolbar
button in the upper-right corner of the window.
l
Take a Snapshot Captures the image displayed in the video pane and saves it as a JPEG file.
m
Open Stream in New
Window
Opens the video in a scalable, independent window. Opening the video in a separate window allows you to view
the video while other applications are running. This window can be minimized, maximized, or closed using the title
bar buttons of the active window. The window can also be resized by dragging a corner of the window.
n
Pan/Tilt/Zoom
Control the encoder and the pan (left/right) and tilt (up/down) of the connected camera by dragging the mouse.
Also, zoom using the scroll wheel on the mouse.

These icons are always available when using the Pelco Media Player. If you are using QuickTime®, PTZ
overlay is only available with PMP player.
Selecting a Stream
1.
Click < > from the live screen.
Move to the Stream settings screen.
2.
Select one of the following streams.
~
Primary STREAM : To select this stream, click the
button next to Primary Stream.
~
Secondary STREAM : To select this stream, click the
button next to Secondary Stream.
~
QuickView STREAM : To select this stream, click the
button next to QuickView Stream.

If the secondary stream has not been configured,
only Primary Stream, and QuickView Stream are
available.
3.
Select the transmission.
~
Unicast : A unicast transmission sends a separate
video stream to each user that is requesting data. Although multiple users might request the same data from the encoder
at the same time, duplicate video streams are transmitted to each user. Every unicast user that connects to the encoder
consumes additional processing power, which limits the number of simultaneous users who can access the camera.
~
Multicast : A multicast transmission sends data to multiple users at the same time using one transmission stream. Each
multicast user that connects to the camera consumes no additional processing power; therefore, multicast video streams
can be sent to an unlimited number of simultaneous users. The multicast transmission setting is available in the primary and
secondary stream display settings.
4.
Select the Player.
5.
Click the <Select> button.