Manual

English
|
13
Installation
FACTORY DEFAULT
1.
Press and hold the Reset switch with a pointed object such as a paper clip before powering on.
2.
Power on.
3.
Release the Reset switch when the power LED [ ] on the top panel is turned on. (about 8 seconds).
4.
When the encoder reset is completed, the system will restart by the factory default.
CONNECTING TO AN EXTERNAL DEVICE
Connecting the Monitor
Connect the [
Tx+ Tx- NO1 COM1 NC1 A1 A2 A3 A4
Rx+ Rx- NO2 COM2 NC2 A5 A6 A7 A8
1 2
1 2
3 4
3 4
5 6
5 6
7 8
7 8
2 4
1 3
6 8
5 7
] port of the encoder to the output port of the monitor. You can watch the video from the camera on the monitor.
A1 A2 NO COM Tx+ Rx+
A3 A4 NC Tx- Rx-
Monitor
1 2
1 2
A1 A2 NO COM Tx+ Rx+
A3 A4 NC Tx- Rx-