INSTALLATION/OPERATION 500 Series Flat Panel LCD Monitors C2937M-A (5/07)
Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Description . . . . . . . . . . . . . . . . . . . . . . . . . . .
List of Illustrations 1 2 3 4 5 6 7 4 Parts List Illustration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Rear Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Front Panel Controls . . . . . . . . . . . . . .
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules.
Description The 500 Series high performance LCD monitors are designed specifically for the security industry and provide high quality display of video or computer signals using multiple inputs. Adjustments of standard monitor display parameters are made using user-friendly, on-screen menus and front panel controls. For viewing multiple cameras simultaneously in high-definition quality on the LCD monitor, Pelco recommends using PMVC4 and PMVR2 multiviewers.
PACKAGE CONTENTS 1 1 1 1 1 1 2 1 23-, 26-, 32-, 37-, or 42-inch TFT LCD monitor with attached stand (removable) US standard power cord EU standard power cord DVI cable VGA cable with 15-pin D-sub connection Remote control unit AAA batteries Installation/Operation manual MONITOR USER MANUAL REMOTE CONTROL/ AAA BATTERIES DVI CABLE VGA CABLE US POWER CORD EU POWER CORD Figure 1. Parts List Illustration NOTE: The PMCL526 ships with the PMCL-V100 adapter; the PMCL532 ships with the PMCL-V200 adapter.
Installation MOUNTING The monitor can be placed on any flat surface (desk or table), or it can be wall mounted. NOTE: Only use a recommended Pelco mount for these LCD monitors. • For the 23-, 26-, and 32-inch models, Pelco recommends the PMCL-WMT tilt wall mount, the PMCL-CM or PMCL-CMP ceiling mount, and the PMCL-WM1A or PMCL-WM2A articulating wall mounts. The 26- and 32-inch model LCD monitors ship with an adapter plate that will make these mounts compatible.
REAR PANEL CONNECTORS Figure 2. Rear Panel Connectors 1. RS-232C: For authorized service use. 2. DVI: Connection to digital video signals from a computer or any Pelco device with DVI output, especially PMVC4 and PMVR2 multiviewers. 3. RGB (VGA): (Loop through is disabled; for future use.) Connection to RGB (VGA) output of a computer or any Pelco device with VGA output, especially PMVC4 and PMVR2 multiviewers. 4.
Operation FRONT PANEL CONTROLS Figure 3. Front Panel Controls 1. Input: Displays the main on-screen menu. 2. Source: Selects the input source and confirms your choice. 3. ! and ": Navigates through the on-screen menu. 4. Vol: Increases (#) or decreases ($) the volume. Also selects or adjusts items on the on-screen menu. 5. (power standby button): Turns on/off the monitor. 6. (power indicator): Indicates power status. Red means the power is off, green means the power is on. 7.
INSTALLING REMOTE CONTROL BATTERIES Figure 4. Battery Installation Refer to Figure 4 for the following procedure. 1. Open and remove the battery cover on the back of the remote control. 2. Install two AAA size batteries (supplied). Match the + and – signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Make sure the lock snaps closed. WARNING: 12 • Dispose of batteries in a designated disposal area. Do not throw batteries into a fire. • Do not mix battery types.
REMOTE CONTROL FUNCTIONS Figure 5.
1. POWER: Turns on or off power to the monitor. 2. (input source): Displays all the available input sources. Press the button to select the desired input source. 3. SCAN: Changes the scan mode of the screen (4:3, 14:9, Over Scan, 16:9). 4. BLUE ONLY: Turns off the red and green colors on the screen to allow color adjustment using professional calibration tools. 5. COLOR TEMP: Adjusts the color temperature (Kelvin) of the screen. 6. MENU/EXIT: Displays/exits the on-screen menu. 7.
VIDEO 1, VIDEO 2, S-VIDEO COMPONENT MODE MENU Figure 6.
Video 1, Video 2, S-Video, Component Mode Menu Field Definitions Input: Select VIDEO 1, VIDEO 2, S-VIDEO, or COMPONENT. Contrast: Adjusts black level of the video screen image (0 to 100). Brightness: Adjusts white level of the video screen image (0 to 100). Color: Adjusts the color saturation of the video signal (0 to 100). Sharpness: Adjusts the picture softer or sharper (0 to 100). Tint: Adjusts the range of color: green to red (-50 to +50).
RGB/DVI MODE MENU Figure 7.
RGB/DVI Mode Menu Field Definitions NOTE: You cannot change the language on this menu. You must use the Video1, Video2, S-Video, Component Mode Menu to change the language. The language will then be changed for both menus. Input: Select RGB or DVI. Contrast: Adjusts black level of the video screen image (0 to 100). Brightness: Adjusts white level of the video screen image (0 to 100). H-Position: (RGB only; dimmed in DVI mode.) Adjusts the horizontal position (-35 to +35).
Maintenance If the quality of the picture is poor and cannot be improved by making adjustments on the front control panel, inspect all system connections and cable runs. WARNING: To reduce the risk of electrical shock, do not remove the cover or back of the monitor. No user-serviceable parts are inside. Refer servicing to qualified personnel, or contact the Pelco Customer Service Department (1-800-289-9100) for assistance.
Supported Input Modes Mode Resolution H Freq. (kHz) V Freq. (Hz) 0 720 x 400 31.469 70.000 1 640 x 480 31.460 50.000 2 640 x 480 31.500 60.000 3 640 x 480 37.700 72.000 4 640 x 480 37.500 75.000 5 640 x 480 43.300 85.000 6 800 x 600 35.100 56.000 7 800 x 600 37.900 60.000 8 800 x 600 48.100 72.000 9 800 x 600 46.900 75.000 10 800 x 600 53.700 85.000 11 1024 x 768 48.400 60.000 12 1024 x 768 56.500 70.000 13 1024 x 768 60.000 75.000 14 1024 x 768 64.
Specifications MODELS PMCL523 PMCL526 PMCL532 PMCL537 PMCL542 23-inch (583 mm) LCD monitor 26-inch (660 mm) LCD monitor 32-inch (800 mm) LCD monitor 37-inch (940 mm) LCD monitor 42-inch (1,067 mm) LCD monitor GENERAL Native Resolution Panel Aspect Ratio Viewing Area PMCL523 PMCL526 PMCL532 PMCL537 PMCL542 Pixel Pitch PMCL523 PMCL526 PMCL532 PMCL537 PMCL542 Video Formats Brightness PMCL523 PMCL526, PMCL532, PMCL537, PMCL542 Contrast Ratio PMCL523 PMCL526 PMCL532 PMCL537 PMCL542 Backlight Type PMCL523 PMCL5
ELECTRICAL Input Voltage Power Consumption PMCL523 PMCL526 PMCL532 PMCL537 PMCL542 Input Interfaces Video Audio Horizontal Frequency Vertical Frequency Sync Format 100-240 VAC, 50/60 Hz 110 W 120 W 150 W 180 W 220 W 2 BNC, looping; 1 S-Video, looping; 1, RGB; 1 DVI; 1 component 2, audio L/R, RCA jack 31 kHz to 69 kHz 56 kHz to 85 kHz NTSC/PAL PHYSICAL Dimensions (with stand) PMCL523 PMCL526 PMCL532 PMCL537 PMCL542 Unit Weight (without stand) PMCL523 PMCL526 PMCL532 PMCL537 PMCL542 Shipping Weight PMCL523
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on fiber optic products and TW3000 Series unshielded twisted pair transmission products. • Three years on Spectra® IV products. • Three years on Genex® Series products (multiplexers, server, and keyboard).
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.
