Spec Sheet

C529 / REVISED 10-03
International Standards
Organization Registered Firm;
ISO 9001 Quality System
PRODUCT SPECIFICATION
matrix systems and controls
KBD100 Keyboard
SWITCHER CONTROL AND PROGRAMMING
Product Features
• Control and Program CM6700 and CM6800 Matrix Switchers
• Select Cameras and Monitors
• Operate Sequences
• Operate Auxiliaries
• Acknowledge Alarms
The KBD100 keyboard is Pelco’s most economical keyboard. It is
used to program and operate CM6700 and CM6800 matrix switchers.
The rear of the keyboard has four DIP switches and an RJ-45 connec-
tor. The DIP switches are used to set the keyboard’s address. Each
keyboard in the system must have a different address. The RJ-45 con-
nector is used to connect to either the CM6700 or the CM6800.
You can connect a single keyboard to the local keyboard port on the
CM6700, or you can connect up to eight if using the remote keyboard
port.
You can connect up to 16 KBD100 keyboards to the CM6800.
MONITOR
MX4000 MULTIPLEXER
(OPTIONAL)
CM6700/CM6800
CAMERA
MONITOR
KBD100
LOOPED
CAMERA
INPUTS
LOCAL
PORT
REMOTE
PORT
CM6700/CM6800 MODE
CAMERA
KBD100
KBD100