Datasheet

19www.pelco.com
Endura
GENERAL
Analog Camera Inputs Yes, via network video encoders
Looping Yes, via network video encoders
IP Camera Inputs Thousands
Compression Technology MPEG-4 and H.264 (base, main, and high profile)
System Operating System Linux
®
Video Storage Distributed NAS architecture includes active/active
failover support
Storage Optimization Yes, video frame rate pruning via patented EnduraStor
Third-Party Storage Optional Fiber channel support for FC SANs
RAID Storage RAID 6
Alarm Inputs / Relay Outputs Yes, for supported cameras and encoders*
Audio Inputs / Outputs Yes, for supported cameras and encoders*
Audio Support Yes
PTZ Control Yes, for supported cameras and encoders*
Third-party Dome Protocols Yes, for supported cameras and encoders*
Optional Analog KBD Support Yes, KBD300, CM9760-KBD, and KBD5000
(support for VCD5202)
Multicasting Yes
Multilingual Yes
3rd Party System Integration Yes, via Pelco API
Certification Required Yes
DISPLAY OPTIONS
Monitor Output Support Hundreds of digital displays via DVI connections from
WS5070, VCD5202, NET5402R-HD with built-in monitor
wall control
Display Support 1x1, 2x2, 3x3, 4x4, 1+5, 2+8, 1+12, 3x2, 4x3
Digital Zoom Live/Playback Yes
FUNCTION
Alarm, Motion, Continuous,
Scheduled Recording Modes
Yes
Redunant components Yes
Pre-Alarm / Post-Alarm 1 minute - 999 minutes / 1 minute - 999 minutes
Optional ATM/POS Support Via 3rd party technology partners
Video Analytics Yes
REMOTE CLIENT
PC Remote Client Yes
View Live Yes
Playback Yes
Email on Alarm Yes
PTZ Control Yes
Remote Administration Yes
Web Browser Yes
Mobile Client Yes
DSSRV options
ENC5416 analog encoder
GENERAL
Video Resolutions D1, 2CIF, CIF, QCIF
Frame Rate D1 480 NTSC / 400 PAL,
independently configurable
Alarm Inputs 16 per ENC5416, 64 maximum per DSSRV
Relay Outputs 4 per ENC5416, 16 maximum per DSSRV
Audio Inputs 16 per ENC5416, 64 maximum per DSSRV
Compression Format H.264 main profile
Analog Output 4 BNC connectors for Spot monitor
PTZ Control Interface 2 RS-422, RS-485
PTZ Protocols Pelco D and third-party
Rackmount 2 mounting brackets included, connection
interface to NVR: direct attached via HDMI cable
NET5400 Encoder
NET5401, NET5402, NET5404
Video Resolutions 4CIF, 2CIF, CIF, QCIF
Frame Rate 25/30 fps at 4CIF maximum, scalable
Motion Detection Yes
Video Analytics Yes
Alarm Inputs 3
Relay Outputs 1
Onboard Memory User-supplied Micro SD
Operating Temperature Range Minimum of 32 °F (0 °C), maximum 122 °F (50 °C)
Compression Formats M-JPEG, H.264 (base, main, and high profile)
Data Rate 20 kbit/s – 6 Mbit/s
(2 Mbit/s per stream X 3)
Video Streams 3
Audio Two-way, full or half duplex
Analog Data Formats No
Analog Output Looping on single and dual channel
Network Protocols TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP,
DNS, DHCP, RTP, NTP
Video Signing at Source Yes
Web Browser Access Yes
Open Architecture Yes, compatible with Pelco API
Users 10 simultaneous, unlimited using Multicast
POE IEEE 802.3af class 3 on single and dual channel
Power 18-30 VAC, 24 VAC nominal; 0.75 A,
50/60 Hz nominal
Pelco System Compatibility Endura, DS
Warranty 3 years
Network video encoders
This family of H.264 network video encoders provides high
performance, single- to multi-channel video encoding,
integrating analog cameras and positioning systems into an
IP video surveillance system.
IP video management solutions
The Endura IP VMS offers the scalability, performance, and reliability required for mission-critical surveillance applications.
Scalable to thousands of cameras, Endura is designed to fit a wide range of customer applications — including airports,
casinos, and city surveillance applications — where unmatched fault tolerance and system integrity are mandatory.
* Please visit www.pelco.com for updated list of supported devices.
* 128 is the database limitation. Actual number is dependent on hardware
specifications and camera settings.
** See Document C1024RN-x “DS Compatibility Release Notes”
on www.pelco.com.