Manual

8 C3473M-C (10/10)
Precautions
1. Refer installation work to the dealer. Installation work requires technique and experience; otherwise, injury
or damage to the product may result. Be sure to consult the dealer.
2. Do not insert objects inside the product. If water or metallic items enter the product, it may cause fire or
electric shock. Turn the power off immediately and contact qualified service personnel for service.
3. Do not attempt to disassemble or modify the product. Failure to observe this may cause fire or electric shock.
Consult the dealer for the repair or inspections.
4. Stop operation immediately when something is wrong with the product. If smoke or the smell of smoke
comes from the product, continued use will result in fire, injury, or damage to the product. Turn the power off
immediately and contact qualified service personnel for service.
5. Select an installation area that can support the total weight. Selecting an inappropriate installation surface
may cause the product to fall down or topple over, resulting in injury. Installation work shall be started after
sufficient reinforcement.
6. Periodic inspections shall be conducted. Rust on the metal parts or screws may cause the product to fall
down resulting in injury. Consult the dealer for the inspections.
7. This product shall be installed in a vibration-free location. Failure to observe this may cause screws and bolts
to be loosened and consequently to fall resulting in injury.
8. Install this product high enough to ensure that people do not hit their heads. Failure to observe this may
cause a drop resulting in injury or accidents.
9. Do not strike or give a strong shock to this product. Failure to observe this may cause injury or fire.
10. Be sure to turn off the power before wiring. Failure to observe this may cause electric shock. A short circuit
or wrong wiring may cause fire.
11. Do not use the product in an atmosphere of flammable gases. Failure to observe this may cause injury by
explosion.
12. Avoid installing the product in locations where it is subject to damage by salt or corrosive gas; otherwise, the
mounting fixtures will deteriorate, causing the product to fall down resulting in injury.
13. Use the specified mounting bracket. Failure to observe this may cause the product to fall down resulting in
injury.
14. Do not rub the edges of metal parts with your hand. Failure to observe this may cause injury.
15. Tighten screws and mounting fixtures to the specified torque. Failure to observe this may cause a drop
resulting in injury or accidents.
16. This product has no power switch. Turn the power off when cleaning the product.
17. Parts of this product may deteriorate and it may shorten the lifetime of this product when used in locations
subject to high temperatures and high humidity. (Recommended operating temperature: +35 °C [95 °F] or
lower). Do not expose this product to direct heat sources such as a heater.
18. Handle this product with care. Do not abuse this product. Avoid striking, shaking, and so forth. The product
could be damaged by improper handling or storage. If a strong shock or vibration is applied to the enclosure,
it may cause damage or allow water to enter this product.
19. Do not touch the dome cover with your bare hands. A dirty dome cover causes deterioration of picture quality.
20. When continuously viewing a bright light source such as a spotlight, the color filter of the CCD may have
deteriorated and it may cause discoloration. Even when changing the fixed viewing direction after
continuously viewing a spotlight for a certain period, the discoloration may remain.
21. Do not aim this product at strong light sources. A light source such as a spot light causes a blooming (light
bleeding) or a smear (vertical lines).