Manual

48 C3473M-C (10/10)
CONNECTING CONDUIT
If open wiring is conducted, be sure to route the cables through conduit to protect the cables from direct sunlight.
When the conduit is connected at the side or bottom position, one of the arrow marks on the mounting base must
be the top position (refer to Figure 43).
Figure 43. Using Conduit from the Bottom
When the conduit is connected from the top, the arrow mark on the camera attachment shall be either in the right
or left position (refer to Figure 44).
Figure 44. Using Conduit from the Top
NOTES:
• When installing the camera on a wall, do not connect the dehumidifying device at the upper side. This will
prevent water from entering and being stored in the dehumidifying device. If water remains inside, the
dehumidifying device cannot function properly.
• Properly install the camera to ensure that water does not enter into the architecture through the conduit joints.
FRONT
TOP