Manual

C3473M-C (10/10) 41
5. Adjust the focus:
a. Loosen the zoom lock knob and move the knob between TELE and WIDE to obtain the appropriate
angle of view, and then tighten the zoom lock knob.
b. Loosen the focus lock knob, make coarse adjustment of the focus, and then tighten the focus lock knob.
c. Perform major adjustment of the back focus by following steps 5, 6, and 7 below or using the setup
menu (refer to the supplied operation manual).
Figure 33. Adjusting the Focus
6. Reset the back focus position to the CS mount default position using one of the following methods:
• Hold down the right and left buttons simultaneously for 2 seconds or more.
• Move the cursor to MANUAL-ADJ of BACK-FOCUS SETUP in the setup menu, and then press the right
and left buttons simultaneously for 2 seconds or more.
7. Adjust the view angle while watching the monitor.
8. Press the ABF1 button to perform auto back focus.
The ABF operation indicator lights, the focus position is displayed in the lower part of the screen, and the back
focus is automatically adjusted.
Figure 34. Focus Position Screen
9. Perform fine adjustment of the back focus using the right or left buttons.
ì
Zoom Lock Knob
î
Focus Lock Knob
NEAR FAR
.........
|
..........
INDICATOR XXXX FOCUSING