Manual

C3473M-C (10/10) 37
ADJUSTING THE CAMERA: SUPER DYNAMIC 5 (SD5)
™
MODELS
1. After the unit has been mounted, remove the enclosure and inner dome to make camera adjustments.
a. Loosen the three fixing screws using the bit for tamperproof screws (supplied).
b. Detach the inner dome while pushing the sides with the PUSH marks (refer to Figure 29).
Figure 29. Detaching the Inner Dome
WARNING: Do not hold the inner dome when carrying the camera; otherwise, the camera part may
fall and it may damage the camera.
ì
Push Marks