Manual

28 C3473M-C (10/10)
b. Engage the camera’s attachment mounting screws with the mounting holes on the camera attachment,
and then rotate the camera in the direction of the arrow to the LOCK position to secure the camera to
the camera attachment without any backlash (refer to Figure 13).
Figure 13. Securing the Camera to the Camera Attachment (Surface Mount)
8. Connect the power cord and the video output cable at the side of the mounting base (refer to Figure 14 and
Wiring on page 47).
9. Apply waterproof treatment to the connected section (refer to Waterproof Treatment for the Cable Joint
Sections on page 47).
Figure 14. Making Cable Connections
ì
Protrusion
ì
Cable Connections
LOCK
OPEN
LOCK
O
PEN