Manual

C3473M-C (10/10) 23
c. Engage the camera’s attachment mounting screws with the mounting holes on the camera attachment,
and then rotate the camera in the direction of the arrow to the LOCK position to secure the camera to
the camera attachment without any backlash.
Figure 7. Mounting the Camera on a 2-Gang Junction Box
3. Remove the enclosure and inner dome (refer to Removing the Enclosure and Inner Dome on page 36).
4. Make adjustments to the camera (refer to Adjusting the Camera: Super Dynamic 5 (SD5)™ Models on
page 37).
5. Reattach the enclosure and inner dome (refer to Mounting the Enclosure and Inner Dome on page 45).
ì
Attachment Mounting Screw
î
Protrusion
ï
Camera Mounting Hole
FRO
NT
T
O
P
OPEN
LOCK