Spec Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODELS
IPS-CABLE Remote monitor cable
IPS-RDPE-2 Remote data port for monitoring at ground level
IPS-CABLE
ELECTRICAL
Connectors
Receiver One RJ-45 serial interface connector
Video One BNC, male connector
Control One serial DB-9 female connector
GENERAL
Length 48" (122 cm)
IPS-RDPE-2
ELECTRICAL
Input Voltage 24 VAC
Power Consumption 1 VA
MECHANICAL
Construction Aluminum
Finish Gray polyester powder coat
Cable Entry Two hole plugs; will accommodate 3/4-inch
(1.91 cm) conduit
Mount Method Four 0.375-inch (0.95 cm) holes on mounting
plate
Latch One stainless steel link-lock latch secured with
screw; latch also can be secured with padlock
(not supplied)
GENERAL
Environment Indoor/outdoor
Operating Range –50° to 122°F (–45° to 50°C)
Unit Weight 2.4 lb (1.1 kg)
Shipping Weight 8.0 lb (3.63 kg)
OPTIONAL ACCESSORY
PA402 Pole mount adapter
CERTIFICATIONS/RATINGS
• CE, Class B
• FCC, Class B
• UL/cUL Listed
• Meets NEMA Type 4X standards
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2010, Pelco, Inc. All rights reserved.
4.01
(10.3)
6.50
(16.5)
7.65
(19.4)
7.32
(18.8)
6.63
(16.8)
6.71
(17.0)
4.50
(11.4)
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.