Spec Sheet

PRODUCT SPECIFICATION
camera solutions
C2453 / REVISED 12-2-10
International Standards
Organization Registered Firm;
ISO 9001 Quality System
Spectra
®
, ExSite
®
, and Esprit
®
Positioning Systems
REMOTE INSTALLATION/SERVICE TOOLS
Product Features
Remote Data Port (IPS-RDPE-2)
• Designed to Provide Ground Level, Local Interface to Spectra* and
ExSite/Esprit Series Systems When Using IPS-CABLE
• Mounts to a Pole or Wall Near Positioning System
• One Remote Data Port is Required Per Positioning System
Remote Monitor Cable (IPS-CABLE)
• Serial Interface Cable for a Windows
®
-Based PC
• Connects to Spectra* Dome Drive or IPS-RDPE-2
• Plugs into Data Port of Spectra Mini Dome System When Used with
IPS-MINIADPT Adapter Cable
Pelco’s remote data port (IPS-RDPE-2) and remote monitor cable
(IPS-CABLE) are field service tools designed to assist in the
installation and servicing of Spectra
®
, ExSite
®
, Esprit
®
, or any pan/tilt
that uses Pelco’s D protocol. Use these tools at the installation site to
verify the operation of the PTZ controls, check the address and baud
settings, and program the positioning system. Software upgrades
†
also can be performed with Spectra/Spectra Mini domes and ExSite
systems.
The IPS-CABLE can be connected to a PC or PDA and monitor directly
to the RJ-45 port of the IPS-RDPE-2 or the Spectra dome drive. The
IPS-CABLE and the supplied software allow full control, setup, and
upgrade capabilities. When used with an IPS-RDPE-2, the
IPS-CABLE also allows the user to control pan/tilt/zoom functions
and program a Spectra, ExSite, or Esprit positioning system or any
other system that accepts Pelco D protocol. It is compatible with most
serial cable/connectors for Windows
®
-based PCs.
The IPS-RDPE-2 remote data port brings all the functionality of the
IPS-CABLE to ground level. The remote data port works with
Spectra, ExSite, and Esprit Series systems. The IPS-RDPE-2 is
compatible with coaxial video and UTP video control systems using
Pelco D, Pelco P, or Coaxitron
®
protocols.
The IPS-MINIADPT adapter cable can be ordered separately for use
with the IPS-CABLE shipped prior to the introduction of the
Spectra Mini dome system.
*IPS-RDPE-2 and IPS-CABLE are compatible with Spectra III
™
Series
and newer model dome systems. Spectra II
®
and previous dome
systems do not support these products.
†
Online software upgrades are available at www.pelco.com .
IPS-RDPE-2
REMOTE DATA PORT
IPS-CABLE
REMOTE MONITOR CABLE