Spec Sheet

PRODUCT SPECIFICATION
camera solutions
C3960 / REVISED 04-10-15
International Standards
Organization Registered Firm;
ISO 9001 Quality System
IPCT01 Pelco IP Camera Installation Tool
PORTABLE TOOL FOR IP CAMERA SETUP
Product Features
• Power Network Camera with Built-in PoE Support
• Simplifies Camera Installation
• Local Storage for Final Installation Snapshots
• 3.5-inch LCD Touch Screen with 320 x 240 Resolution
• Supports DHCP or Static IP Address
• Upgradeable in the Field with New Firmware
The IPCT01 IP camera installation tool is a portable, battery-powered
tool that provides flexibility in field installation of network video
cameras with built-in Power over Ethernet (PoE) support. It connects
directly to a camera to provide power, and display live video to adjust
camera viewing angle and focus. Power can also b e delivered
through PoE bypass from an alternate power source. The tool offers
a user-friendly, 3.5-inch touch screen for zooming and programming
functions.
Pelco’s IPCT01 can also be connected to a network to search for
network video cameras. Local storage of final installation snapshots
can be taken by pressing the snapshot button and saving to an SD
card or USB device.
The IPCT01 IP camera installation tool is optimized to supply power
for cameras with PoE IEEE802.3af, Class 2 power input. Cameras
rated for IEEE802.3at, Class 3 require a higher-capacity BP-930 type
battery. Extra batteries must be purchased separately.
The IPCT01 can optionally be upgraded to connect to ONVIF Profile S
cameras through a license upgrade.