Manual

C3916M (2/13) 21
CHANGING THE LIGHTING CONDITION
1. Place your mouse pointer over the Imaging tab.
2. Select Advanced from the drop-down menu.
3. Select the lighting condition of the camera:
Outdoor: Specifies an indoor lighting condition in which a lot of outdoor lighting is present, such as when a camera is installed in a room
with large windows.
Indoor Daylight (with flicker-control): Specifies an indoor lighting condition in which the lighting is cool fluorescent with flicker control.
Indoor Warm Light (with flicker-control): Specifies an indoor lighting condition in which the lighting is warm fluorescent with flicker
control.
4. If required, click the “Restore Settings to Defaults” button to restore the default settings.
CHANGING THE LINE FREQUENCY
1. Place your mouse pointer over the Imaging tab.
2. Select Advanced from the drop-down menu.
3. Select the AC frequency of the indoor lighting sources:
Auto: Selects a line frequency of either 50 Hz or 60 Hz, automatically. The default setting is auto, however, it is recommended that you
select a line frequency.
50 Hz: Selects a line frequency of 50 Hz, typically in use in Europe.
60 Hz: Selects a line frequency of 60 Hz, typically in use in North America.
4. If required, click the “Restore Settings to Defaults” button to restore the default settings.