Manual
Table Of Contents
- Sarix® IL10 Series IP Camera
- Contents
- Important Notices
- Introduction
- Operation
- Live Video Page
- Settings Page
- System Tab
- Changing the Device Name
- Configuring DHCP Time Server Settings
- Configuring Manual Time Server Settings
- Customizing the Appearance of the Text Overlay
- Generating a System Log
- Rebooting the Camera
- Restoring All Camera Defaults
- Downloading a Full Backup of Camera Settings
- Uploading a Backup File to Restore Camera Settings
- Network Tab
- Imaging Tab
- Video Streams Tab
- Users Tab
18 C3916M (2/13)
SELECTING SNMP SETTINGS
1. Place your mouse pointer over the Network tab.
2. Select SNMP from the drop-down menu.
3. Select the SNMP version to configure: No SNMP Server, SNMP V2c, or SNMP V3. The default setting is No SNMP Server, which disables
the SNMP configuration.
NOTE: SNMP V2c and SNMP V3 configuration settings are independent of each other, but only one SNMP version can be active at a time.
CONFIGURING SNMP V2C
1. Place your mouse pointer over the Network tab.
2. Select SNMP from the drop-down menu.
3. Select SNMP V2c for the SNMP version.
4. Type the community name in the Community String box. The default name for the Community String is ”public.”
5. Configure the Trap Configuration settings:
Address: Type the host name or IP address of the recipient of the trap message.
Community String: Type the name of the community that should receive the trap message.
6. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
CONFIGURING SNMP V3
1. Place your mouse pointer over the Network tab.
2. Select SNMP from the drop-down menu.
3. Select SNMP V3 for the SNMP version.
4. View the read-only Engine ID, which is a unique string that identifies the device to SNMP V3.
5. Type the SNMP user name in the SNMP user box.
6. Select the encryption algorithm for authentication from the Authentication drop-down menu: None, MD5, or SHA. If you use authentication
method MD5 or SHA, type a password in the box to the right of the selected Authentication encryption.
7. Select the privacy encryption algorithm setting from the Privacy drop-down menu: None, DES, or AES. If you use privacy method DES or
AES, type a password in the Privacy text box.
8. Type the address for the Trap Configuration in the Address text box. The Address is the host name or IP address of the recipient of the trap
message.
9. Click the Save button to save the settings, or click the Reset button to clear all of the information you entered without saving it.
WARNING: The Simple Network Management Protocol (SNMP) settings are advanced controls. Contact your network administrator to
obtain the required information to configure SNMP settings.