Datasheet

24 Pelco by Schneider Electric Product comparison guide IP video solutions
NET5400 Encoder
NET5401, NET5402, NET5404
Video resolutions 4CIF, 2CIF, CIF, QCIF
Frame rate 25/30 fps at 4CIF maximum, scalable
Motion detection Yes
Video analytics Yes
Alarm inputs 3
Relay outputs 1
Onboard memory User-supplied Micro SD
Operating temperature range Minimum of 32 °F (0 °C), maximum 122 °F (50 °C)
Compression formats MJPEG, H.264 (base, main, and high prole)
Data rate 20 kbit/s – 6 Mbit/s
(2 Mbit/s per stream 16x 3x)
Video streams 3
Audio 2-way, full-or half-duplex
Analog data formats No
Analog output Looping on single and dual channel
Network protocols TCP/IP, UDP/IP (unicast, multicast IGMP), UPnP,
DNS, DHCP, RTP, NTP
Video signing at source Yes
Web browser access Yes
Open architecture Yes, compatible with Pelco API
Pelco system compatibility Endura, DS
Network video encoders
This family of H.264 network video encoders provides high-
performance, single- to multi-channel video encoding, integrating
analog cameras and positioning systems into an IP video
surveillance system.
IP video management solutions
The Endura
™
IP VMS offers the scalability, performance, and reliability required for mission-critical surveillance applications.
Scalable to thousands of cameras, Endura is designed to fit a wide range of customer applications — including airports,
casinos, and city surveillance applications — where unmatched fault tolerance and system integrity are mandatory.
Endura
GENERAL
Analog camera inputs Yes, for supported cameras and encoders *
Compression technology MPEG4 & H.264 (base, main, and high prole)
Storage optimization Yes, Pelco EnduraStor
3rd-party storage Optional bre channel support
RAID 6 support Ye s
Alarm inputs/relay outputs Yes, see Pelco.com for supported cameras & encoders
Audio support Yes, see Pelco.com for supported cameras & encoders
PTZ control Yes, see Pelco.com for supported cameras & encoders
Pelco matrix support Yes
Multilingual Support Yes
3rd-party system integration Yes
Pelco aggregation support Yes
DISPLAY OPTIONS
Monitor output support Hundreds of digital displays via DVI connections from
WS5070, VCD5202, NET5402R-HD with built-in monitor
wall control (1x1, 2x2, 3x3, 4x4, 1+5, 2+8, 1+12, 3x2,
4x3)
Digital zoom live/playback Yes
FUNCTION
Alarm, motion, continuous,
scheduled recording modes
Yes
Failover and redunancy Ye s
Pre-alarm/post-alarm 1 minute–999 minute / 1 minute–999 minute
Video analytics Yes
REMOTE CLIENT
E-mail on alarm, SNMP
support
Yes
Remote administration Yes
Web and mobile support Yes
* Please visit www.pelco.com for updated list of supported devices.
Pelco aggregation software
Pelco aggregation software allows Endura customers to
monitor multiple Endura installation sites via a common
user interface. Leveraging industry-standard virtual machine
implementation, Pelco aggregation creates a layer that
spans multiple Endura systems, while allowing sites to be
operated and managed locally. Featuring easy access to
live and recorded video, PTZ support, and a web-accessible
platform, Pelco aggregation makes it possible to access any
system from any location on any device, providing increased
access to relevant video data to enable more informed
decision making across organizations.