Spec Sheet

C2200 / REVISED 1-07
International Standards
Organization Registered Firm;
ISO 9001 Quality System
PRODUCT SPECIFICATION
camera solutions
IDM4012SS Mount
W
ALL MOUNT, STAINLESS STEEL, FOR SPECTRA
®
SPECIAL
TY DOMES
Product Features
• For Use with Spectra
®
Series Specialty Domes
• Can Also Be Used with Other Pendant Domes using 1.5-inch NPT
Threaded Pipe for Mounting
• Constructed of Type 304 Stainless Steel
• Mounts Directly to Vertical Load-Bearing Surface for Wall Mount
Applications
• Supports up to 75 Pounds (34 kg)
• Includes Cable Feedthrough Hole
The IDM4012SS wall mount is designed specifically for the Stainless
Steel and Pressurized Spectra
®
Series Dome Systems (Spectra III
™
or
newer models). The mount is constructed of type 304 stainless steel
with a gray polyester powder coat finish making it ideal for harsh
environmental installations.
IDM4012SS can be attached directly to any vertical load-bearing
surface and is designed to support up to 75 pounds (34 kg). Conduit
accesses are available through the back mounting plate or through the
bottom of the mount where a flexible metal conduit fitting can be
installed. A gasket is provided for the back mounting plate to protect
the interior of the IDM4012SS.
The mount is threaded for 1.5-inch NPT pipe, and is compatible with
any Spectra
®
, DF5, or DF8 Series pendant back box.
NOTE: VALUES IN PARENTHESES ARE CENTIMETERS;
ALL OTHERS ARE INCHES.
4.50
(11.43)
6.50
(16.50)
8.0
(20.32)
12.0 (30.47)
2.0
(5.08)
6.00
(15.23)
4X0.375 THRU