Spec Sheet

PRODUCT SPECIFICATION
transmission & power
C3936 / REVISED 7-31-14
International Standards
Organization Registered Firm;
ISO 9001 Quality System
FUMS-F Series Unmanaged Ethernet Switches
4- OR 8-PORT, 10/100 MBPS, WITH AND WITHOUT FSFP MODULES
Product Features
• 10/100 Mbps Ethernet
– 10Base-T/100Base-TX Electrical Port
– 100Base-FX Optical Port
• Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps,
Full-Duplex or Half-Duplex Data
• Optical Port Supports 100 Mbps Full-Duplex Data
• Automatic Medium Dependent Interface/Medium Dependent
Interface Crossover (MDI/MDI-X) Operation
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• Uses Interchangeable Small Form-Factor Pluggable (FSFP) Modules
for Specific Fiber Type, Distance, and Connector (Must Be Ordered
Separately)
• Voltage Transient Protection on All Power and Signal Input/Output
Lines Provides Protection from Power Surges and Other Voltage
Transient Events
• LED Status Indicators for Monitoring All Critical and Normal
Operating Parameters
• Hot-Swappable Rack Modules
• Stand-Alone or Rack-Mountable Modular Design
• Compliant with IEEE 802.3 Standards
The FUMS-F Series Ethernet 4- and 8-port unmanaged switches
are designed to transmit and receive 10/100 Mbps data over optical
fiber through user-selectable small form-factor pluggable (FSFP)
options; or 10 Mbps or 100 Mbps data over Cat5e or Cat6 electrical
cable. The electrical interface autonegotiates between 10 Mbps or
100 Mbps Ethernet rates without any adjustments. The optical
interface operates at a 100 Mbps Ethernet rate.
These units integrate four or eight independent 10/100 Mbps
channels in a single package. The FUMS-FFX4TX4, FUMS-FFX2TX2,
FUMS-FTX4, and FUMS-FFX8 require interchangeable FSFP modules
(ordered separately) for specific fiber type, distance, and connectors.
Modular in design, these models may be either wall- or
rack-mounted. LED indicators display operating status and critical
operating parameters. These models are designed to operate in
extreme environments. External power is required for the
FUMS-F Series units.Theunitscanbepoweredwiththe
recommended FEXTPS fiber external power supply.
The optical transmission of Ethernet-compatible IP camera
surveillance video makes the FUMS-F Series ideal for
transportation, airport, and college campus applications.
FUMS-FFX8 FUMS-FTX4