Installation Manual
C5634M-A / REV 07-24-14
TECH SUPPORT: (800) 289-9100 INTERNATIONAL: +1 (559) 292-1981
INSTALLATION AND OPERATION MANUAL
FTV/FRV40D2(M,S)1(ST,FC)
4-CHANNEL 10-BIT DIGITALLY ENCODED VIDEO
+ 2 BIDIRECTIONAL DATA CHANNELS
+ 1 BIDIRECTIONAL CONTACT CLOSURE
The FTV/FRV40D2(M,S)1(ST,FC) series transmits four channels of video
utilizing state of the art 10-bit digital encoding and decoding for very high quality
video transmission, along with two channels of bidirectional data and one
bidirectional contact closure over one single mode or multimode optical fiber.
This equipment is environmentally hardened and suitable for use in
unconditioned roadside or out-of plant installations.
The FTV/FRV40D2(M,S)1(ST,FC) is compatible with NTSC, PAL and SECAM
video transmission protocols and supports bi-directional RS232, RS422 and
RS485 (2W/4W) data. See Figure 4 on Page 4 for data selection.
See Figure 6 on Page 6 for contact switch positions.
Bi-Color LED indicators are provided to indicate the status of the system, video
and data. See Figure 7 on Page 6 for LED indication explanations.
These units are interchangeable between stand-alone or card mount
configurations. See Figure A on Page 7 for mounting instructions.
See Figures 1 – 7 for complete installation details. No additional parts or power
supplies are required.