Data Sheet

PRODUCT SPECIFICATION
transmission & power
C3915 / REVISED 11-9-12
International Standards
Organization Registered Firm;
ISO 9001 Quality System
FTV10M Miniature Fiber Transmitter
SINGLE-CHANNEL DIGITALLY ENCODED VIDEO
Product Features
• Miniature Module Designed for Use in Pelco
®
EH2515/EH3512/EH3515 Series Camera Enclosures and in
DF5/DF8 Series Fixed Mount Domes, or for Use as a
Stand-Alone Module
• 10-Bit Digitally Encoded Video for High-Quality Transmission over a
Single Fiber
• 1 Simplex Contact Closure
• Multimode Fiber Support for Distances up to 4 km (2.5 mi)
• Single-Mode Fiber Support for Distances up to 54 km (33.6 mi)
• Exceeds All Requirements for EIA RS-250C Short-Haul Transmission
Specifications
• Laser for Transmission of Optical Signals
• Compatible with NTSC, PAL, or SECAM Video Standards
• Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal
Control Equipment Environmental Standards
• LED Status Indicators for Monitoring All Critical Operating
Parameters
The FTV10M miniature fiber transmitter allows transmission of one
composite video channel over one optical fiber. The FTV10M
transmitter is compatible with the FRV20 Series receivers. The
FTV10M transmitter is available in multimode and single-mode
versions. When using single-mode fiber, the FTV10M transmitter
and compatible receiver offer an optical power budget of up to 16 dB
and provide a transmission distance of up to 54 km (33 mi).
Plug-and-play design ensures ease of installation requiring no
electrical or optical adjustments. Specially designed for use in
EH2515/EH3512/EH3515 Series camera enclosures and in DF5/DF8
Series fixed mount domes, the FTV10M transmitter can also be used
as a stand-alone module. As a stand-alone module, the unit can be
placed on a desktop or can be mounted to a wall.
For stand-alone and wall mount installations, external power is
required for the FTV10M transmitter. The unit can be powered with
the recommended FEXTPS fiber external power supply.
FTV10S1STM