Data Sheet

Pelco by Schneider Electric
3500 Pelco Way, Clovis, California 93612-5699 United States
USA & Canada Tel [phone] Fax [phone]
International Tel [phone] Fax [phone]
www.pelco.com
TECHNICAL SPECIFICATIONS
MODELS
VIDEO
Number of Channels 1
Video Input 1.0 Vp-p, 75 ohms; NTSC, PAL, SECAM
Overload >1.5 Vp-p
Bandwidth (minimum 5 to 10 MHz
Differential Gain <2%
Differential Phase <0.7°
Tilt <1%
Signal-to-Noise Ratio >67 dB typical at maximum optical loss
Max. Coaxial Cable (RG59) 100 m (300 ft) camera to fiber optic module to
maintain 6 Mhz bandwidth
ELECTRICAL
Power
Surface Mount 8 to 15 VDC at 2 W
Rack Mount Provided by rack
MTBF >100,000 hours
Current Protection Automatic resettable solid-state current
limiters
Circuit Board Meets IPC standards
LED Indicators Video, Link, Power
MECHANICAL
Connectors
Power Terminal block
Optical ST or FC
Video BNC (gold-plated center pin)
Number of Rack Slots 1
GENERAL
Dimensions 15.5 × 13.5 × 2.8 cm
(6.1" D × 5.3" W × 1.1" H)
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Unit Weight 0.34 kg (0.75 lb)
Shipping Weight 0.90 kg (2.00 lb)
CERTIFICATIONS/RATINGS
†
• CE, Class A
• FCC, Class A
• UL/cUL Listed
•C-Tick
• Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control
equipment environmental standards
†
At the time of this printing, all certifications are pending. Please
consult the factory, our Web site (www.pelco.com), or the most
recent B.O.S.S.
®
update for the current status of certifications.
RECOMMENDED ACCESSORIES
EURACK 4 RU rack accessory with European power
supply
USRACK 4 RU rack accessory with North American
power supply
FEXTPS Fiber External Power Supply with multiple
plug adaptors (North American, Australian,
United Kingdom, and European);
100 to 240 VAC, 50 to 60 Hz input,
9 VDC output
Transmitter
Compatible
Receiver
Fiber Optical
Connector Type
Number
of Fibers
Wavelength
Optical Power
Budget
Maximum
Transmission
Distance*
Multimode (62.5/125 µm)
FTV10M1ST FRV20M2ST ST 1 1310 nm 12 dB 4 km (2.5 mi)
Single Mode (9/125 µm)
FTV10S1ST FRV20S2ST ST 1 1310 nm 16 dB 54 km (33.6 mi)
FTV10S1FC FRV20S2FC FC 1 1310 nm 16 dB 54 km (33.6 mi)
Note: This product requires a fiber installation with a minimum 30 dB connector return loss.
*Transmission distance will be diminished if additional losses are introduced by the optical connectors, splices, and
other factors regarding the quality of the fiber. The operating distance of multimode is limited by the characteristics
of the fiber bandwidth.
Pelco, the Pelco logo, and other trademarks associated with Pelco products referred
to in this publication are trademarks of Pelco, Inc. or its affiliates. All other
product names and services are the property of their respective companies.
Product specifications and availability are subject to change without notice.
©Copyright 2012, Pelco, Inc. All rights reserved.