Manual

Tech SupporT: [phone] InTernaTIonal: [phone] C5633M / REV 09-07-12
INSTALLATION AND OPERATION MANUAL FTV/FRV10D1(M,S)1(ST,FC)
FIGURE 4 – DATA CHANNEL CONNECTIONS
FIGURE 5 – SWITCH POSITIONS
The mode for each data channel is configured using a pair of switches on the front panel of the unit.
GND
+Vin
PWR
OPTICAL
IN/OUT
VIDEOIN
POWER
12
ON
B
A
DOUT-
DOUT+
DIN-
DIN+
GND
DIN
DOUT
232485422
DATA
DATAOUT
DATA IN
VIDEO
LINK
FTV10D1S1ST
VIDEO
TRANSMITTER
+
2 WAY DATA /
UP the COAX
Switch
FIGURE 6 – LED INDICATORS
LINK VIDEO DATA IN DATA OUT POWER
GREEN Communication link
has been established
over optical fiber
An active video signal
is present on the BNC
connector.
An active data signal
is present on the
input pins of the data
connector.
An active data signal
is present on the
output pins of the
data connector.
Unit powered up
RED Communication
link has not been
established.
– – – –
OFF Unit powered down.
Up-the-Coax
Protocols
RS485
4-Wire Data
RS232 Data RS422,
RS485 2-Wire,
Manchester or
Bi-Phase Data
1 2
1 2
1 2 1 2